How to Download and Install Icom M710 Programming Software
How to Download and Install Icom M710 Programming Software
If you own an Icom M710 marine radio, you may want to program it with your own frequencies and settings. To do that, you need a special software called Icom M710 Programming Software. This software allows you to connect your radio to your computer and modify various parameters such as channels, modes, power, scan, and more.
In this article, we will show you how to download and install Icom M710 Programming Software on your Windows PC. You will also need a programming cable that connects your radio to your computer's serial port. If you don't have one, you can buy it online or from an authorized Icom dealer.
icom m710 programming software download
Step 1: Download Icom M710 Programming Software
The first step is to download the software from the official Icom website. Here is the link: https://www.icom.co.jp/world/support/download/firm/M710/1_00/
On this page, you will see a file named M710.zip. This is the software file that you need to download. Click on the file name and save it to your computer.
Step 2: Extract Icom M710 Programming Software
The next step is to extract the software file that you downloaded. To do that, you need a program that can unzip compressed files. You can use the built-in Windows utility or any other program such as WinZip or 7-Zip.
Right-click on the M710.zip file and choose Extract All. Choose a destination folder where you want to extract the files and click Extract. You will see a folder named M710 with several files inside.
Step 3: Install Icom M710 Programming Software
The final step is to install the software on your computer. To do that, double-click on the file named setup.exe inside the M710 folder. This will launch the installation wizard.
Follow the instructions on the screen and accept the license agreement. Choose a location where you want to install the software and click Next. The installation process will begin and may take a few minutes.
When the installation is complete, click Finish. You will see a shortcut icon for Icom M710 Programming Software on your desktop. You can now launch the software and start programming your radio.
Step 4: Connect Your Radio to Your Computer
Before you can program your radio, you need to connect it to your computer using the programming cable. Make sure your radio is turned off and unplugged from the power source. Then, connect one end of the cable to the serial port on the back of your radio and the other end to the serial port on your computer. If your computer does not have a serial port, you may need a USB-to-serial adapter.
After you connect the cable, turn on your radio and set it to the programming mode. To do that, press and hold the MODE button for two seconds until you see PROG on the display. Your radio is now ready to be programmed.
Step 5: Program Your Radio Using Icom M710 Programming Software
Now that you have installed the software and connected your radio, you can start programming it. To do that, launch Icom M710 Programming Software from your desktop or start menu. You will see a window with several tabs and buttons.
The first thing you need to do is to read the current settings from your radio. To do that, click on the Read button on the toolbar. The software will communicate with your radio and display its settings on the screen. You can now modify any parameter that you want.
For example, you can change the channel frequency, mode, power, scan group, and more. You can also add or delete channels, copy or paste settings, and save or load files. You can use the tabs at the bottom of the window to switch between different settings categories.
When you are done with programming your radio, you need to write the new settings back to your radio. To do that, click on the Write button on the toolbar. The software will send the new settings to your radio and confirm that they are written successfully.
You can now exit the software and disconnect your radio from your computer. Your radio is now programmed with your own frequencies and settings. You can test it by turning it on and using it normally.
Conclusion
In this article, we have shown you how to download and install Icom M710 Programming Software on your Windows PC. We have also shown you how to connect your radio to your computer and program it using the software. We hope this article was helpful and informative for you.
If you have any questions or comments about this article or Icom M710 Programming Software, please feel free to contact us or leave a comment below. We will be happy to assist you. 0efd9a6b88
https://www.amtecmedical.com/group/mysite-200-group/discussion/25c1321a-aa72-487a-a825-6df1f179a646